Run: 001
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.92 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 10
2
6.4
3.0 5.0 3.0 5.0
______________________________________

Run: 002
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.2 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 10
2
6.4
3.0 5.0 3.0 5.0
______________________________________

Run: 003
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.6 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 10
2
6.4
3.0 5.0 3.0 5.0
______________________________________

Run: 004
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 10
2
6.4
3.0 5.0 3.0 5.0

______________________________________

Run: 005
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2
6.4
3.0 5.0 3.0 5.0

Notes: Identified output file (5 or 6?) as belonging to 5
______________________________________

Run: 006
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
4
6.4
3.0 7.0 3.0 7.0 3.0 7.0 3.0 7.0

Notes: Program failed at some point in execution
______________________________________

Run: 007
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
3.0 5.0
______________________________________

Run: 008
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 5.0
______________________________________

Run: 009
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.5
______________________________________

Run: 010
Date:

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.8

Notes: Lost output?
______________________________________

Run: 011 (As Run 9, but with new NV Gsharp-format output)
Program: stmet3d
Date: 16.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.5

Notes: Program froze while writing Sintprod: RhoPlotX, RhoPlotZ empty.
______________________________________

Run: 012 (As Run 11, but with 2 more variables passed to OUTPUT)
Program: stmet3d
Date: 18.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.5

Notes: Program froze while writing Sintprod: RhoPlotX, RhoPlotZ empty.
______________________________________

Run: 013a (As Run 12, 2 variables and Gsharp formatting removed)
Program: stnonv
Date: 19.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.5

Notes: Program now runs on PC3177! Quirk.
	 New formatting: a=PC3177, b=PC3230
______________________________________

Run: 014b (As Run 11, but on PC3230)
Program: stmet3d
Date: 19.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.5

Notes: Program ran; exactly the same as prog which froze on PC3177.
______________________________________

Run: 015a (As run 5, but with new NV Gsharp-format output, see if still crashes)
Program: stmet3d
Date: 20.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2
6.4
3.0 5.0 3.0 5.0

Notes: Program froze as before, while writing Sintprod:
       RhoPlotX, RhoPlotZ empty.
______________________________________

Run: 016b (As run 15a, help in IDing previous files: which is 5/6?)
Program: stmet3d
Date: 20.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2
6.4
3.0 5.0 3.0 5.0

Notes: Program ran. From here, assumed that program is run on PC3230.
______________________________________

Run: 017 (As run 10, for which result was lost)
Program: stmet3d
Date: 24.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
6.4
4.0 4.8

Notes: -
______________________________________

Run: 018 (As run 17, 2 staggered lines)
Program: stmet3d
Date: 24.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2
6.4
4.0 4.8 3.6 4.4

Notes: -
______________________________________

Run: 019 (As run 18, 4 staggered lines)
Program: stmet3d
Date: 25.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
4
6.4
4.0 4.8 3.6 4.4 3.2 4.0 2.8 3.6

Notes: Stopped running at start of track 4.
       Some problem with memory locations.
       All output files empty.
______________________________________

Run: 020 (As run 19, 3 staggered lines)
Program: stmet3d
Date: 26.09.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
3
6.4
4.0 4.8 3.6 4.4 3.2 4.0

Notes: Lost results, or didn't run: not sure.
______________________________________

Run: 021 (More thermal nodes: 18x16x25. Simple single line scan.)
Program: sttemp
Date: 01.10.01

85 20 50
18 16 25
4 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 24
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0
0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1
2.3
4.4 4.6

Notes: Wouldn't run. Too many nodes probably.
______________________________________

Run: 022 (Program's matrix solution subroutine changed: sparse matrix system.
More powder and thermal nodes used: 85x20x100, 18x16x34. Multiple layers also: ran 4)
Program: stmet3dgmres
Date: 31.10.01

85 20 100
18 16 34
8 4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 3 3 6 36 
8 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.92 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
5 4 10
2 2 2 2 
10.0 10.0 10.0 10.0 
5.0 7.0 5.0 7.0
5.0 7.0 5.0 7.0
5.0 7.0 5.0 7.0
5.0 7.0 5.0 7.0

Notes: Now only 12 seconds per heat step, 200x faster.
______________________________________

Run: 023 (Geom. as run 16b, compare output of stmet3d and stmet3dgmres)
Program: stmet3dgmres
Date: 05.11.01

85 20 100
18 16 34
8 4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 3 3 6 36 
8 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2
6.4
3.0 5.0 3.0 5.0

Notes: Change in thermal mesh setup relative to 16b, important?
       Didn't run, probably a problem with dat file. Printed some
       stuff to screen about i, j and some numbers.
       Did some practice runs: turns out that with powder bed/
       thermal mesh and scan start/end pos'ns as specified, thermal
       mesh moves outside powder bed mesh. 3.0-5.0 problem, 5.0-7.0 OK.
______________________________________

Run: 024 (Added NV sections to stmet3dgmres)
Program: stmet3dgmres
Date: 07.11.01

85 20 100
18 16 34
8 4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 3 3 6 36 
8 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2 
6.4 
5.0 7.0 5.0 7.0

Notes: Geom. as run 23 (16b), compare output of stmet3d and stmet3dgmres,
       except that line start/ end positions had to be moved inwards a bit.
       Got a rhoplotx and rhoplotz now.
______________________________________

Run: 025 (As 16b, modified PARAMETER statements back)
Program: stmet3dgmres
Date: 07.11.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24 
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2 
6.4 
3.0 5.0 3.0 5.0

Notes: Geom. as 16b, compare output of stmet3d and stmet3dgmres.
       Modified PARAMETER statements in program, to get back to
       powder bed 85x20x50, thermal mesh 17x17x17 again.
       Wrote Excel spreadsheet to calculate PARAMETERs.
______________________________________

Run: 026 (As 025, modified FORMAT statements too)
Program: stmet3dgmres
Date: 07.11.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24 
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2 
6.4 
3.0 5.0 3.0 5.0

Notes: dat file as before. Changed stmet3dgmres slightly:
       at end of "Output" subroutine, 8 FORMAT statements
       for output, should be changed when thermal mesh
       size is changed. Alters output much?

       Verdict: rhoplotx, rhoplotz don't use FORMAT
       statements, won't change the data I look at. May
       alter sintprod/ rhoplot.
______________________________________

Run: 027 (Modified PARAM statements and dat file majorly)
Program: stmet3dgmres_sl
Date: 08.11.01

360 30 30
17 30 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12
4 2 1 1 1 1 1 1 1 1 1 1 1 1 2 4
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
60.0 6.0 1.1
0.4 20.0 4356.0 7850.0 7850.0
0.25 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1 
2.6 
9.0 54.0

Notes: Beginning to think about modelling single lines.
       Need a long, deep-ish, narrow trench.
       Not running past step 1: due to thermal mesh outside powder bed?
       Thermal mesh 2 layers shallower than powder bed, 6 nodes narrower.
       "Retrieve" failing to read from (non-existent?) location.

       Also, altering data to suit my steel powder/ processing cond'ns.
______________________________________

Run: 028 (Modified dat file, try to get to run)
Program: stmet3dgmres_sl
Date: 09.11.01

360 30 30
17 30 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12
2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
60.0 6.0 1.1
0.4 20.0 4356.0 7850.0 7850.0
0.25 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1 
2.6 
9.0 54.0

Notes: Runs! Reduced z spacing of thermal mesh. Can probably increase
       size again, but must place it exactly in centre of powder bed mesh.
______________________________________

Run: 029 (Testing extreme scan coords)
Program: stmet3dgmres_sl
Date: 09.11.01

360 30 30
17 30 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12
4 2 1 1 1 1 1 1 1 1 1 1 1 1 2 4
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
60.0 6.0 1.1
0.4 20.0 4356.0 7850.0 7850.0
0.25 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1 
2.8 
3.0 62.0

Notes: Added 4 more nodes width to thermal mesh z. By trial and error, found
       that two meshes are centred w.r.t each other in z direction by placing
       thermal mesh at z=3.3mm. Not sure why, I calculate powder bed to be
       5.3mm wide. Program will run with z=2.8mm, so used this. Also found
       upper/ lower length limits, 3.0 and 62.0mm.

       Found situation where therm. mesh can be moved +-0.5mm, but can not add
       two more nodes to therm. mesh (should only widen it by 0.4mm).

       Resulting bed was 4.5mm wide, 11.6mm deep, 65mm long (Rhoplot). Discovered
       Rhoplot only records data for the areas of powder which have been processed
       by the thermal mesh.

       No sintered material! Slight difference in opinions.
______________________________________

Run: 030 (Upped absorptance)
Program: stmet3dgmres_sl
Date: 09.11.01

360 30 30
17 30 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12
4 2 1 1 1 1 1 1 1 1 1 1 1 1 2 4
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
60.0 6.0 1.1
0.4 20.0 4356.0 7850.0 7850.0
0.50 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1 
2.8 
3.0 6.0

Notes: Try and find out where material starts to melt alpha-wise.
       Still no sintered geom.
______________________________________

Run: 031 (Upped absorptance again)
Program: stmet3dgmres_sl
Date: 09.11.01

360 30 30
17 30 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12
4 2 1 1 1 1 1 1 1 1 1 1 1 1 2 4
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
60.0 6.0 1.1
0.4 20.0 4356.0 7850.0 7850.0
1.0 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
1 
2.8 
3.0 6.0

Notes: Slight densification
______________________________________

Run: 032 (Matlab compatibility)
Program: stmet3dgmres
Date: 14.11.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24 
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4710.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
2 1 5
2 
6.4 
3.0 5.0 3.0 5.0

Notes: As 16b again, but hoping to model result as a 3D volume. Can read
       Rhoplot x/z directly into Matlab, but problem with "Slice x/z = " text, not
       recognised. So change OUTPUT, NV section to remove text, replace with
       slice value then 0.0, 0.0 (meaningless) in Rhoplotz. At the same time,
       have changed GSharp scripts to add "Slice x/z =" to title for each of the
       3 slice graphs automatically.

       Result: is actually easier to import data from Rhoplot than Rhoplotx/z. 
______________________________________

Run: 033 (Irregular shape)
Program: stmet3dgmres
Date: 06.12.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
4 3 5
3 4 3
6.4 4.6 5.2
4.0 4.8 3.6 4.4 4.0 4.8
3.6 4.4 4.0 4.8 3.6 4.4 4.0 4.8
4.0 4.6 3.0 8.0 4.0 7.0

Notes: Changed stmet3dgmres, to add an extra line to start of Rhoplot file.
       Want a sintered object of interesting shape, to demo ISOSURF to THCC.

       Wouldn't run, for geometrical reasons: couldn't manage to get 4 lines
       in a layer, also problems with tight acceptable "z start" range.
       Due to size of thermal mesh vs. powder bed mesh in z direction, quite tight. 
______________________________________

Run: 034 (Geometrical problems solved)
Program: stmet3dgmres
Date: 06.12.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
4 3 5
3 3 3
6.4 6.4 6.0
4.0 4.8 3.6 4.4 4.0 6.0
3.6 4.4 4.0 4.8 3.6 4.4
4.0 4.6 3.0 8.0 4.0 7.0

Notes: Checked Rhoplot, new first line is as planned.
______________________________________

Run: 035 (Unprocessed top layer)
Program: stmet3dgmres
Date: 07.12.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
5 4 5
3 3 3 1
6.4 6.4 6.0 6.4
4.0 4.8 3.6 4.4 4.0 6.0
3.6 4.4 4.0 4.8 3.6 4.4
4.0 4.6 3.0 8.0 4.0 7.0
4.0 4.0

Notes: Eliminated anomalous top surface, which had made sintered geometry
       hollow at the top. Method: dummy first layer where nothing sintered.
       Does this reduce size of top sintered layer? Can't think of a reason why.
______________________________________

Run: 036 (Large middle layer)
Program: stmet3dgmres
Date: 07.12.01

85 20 50
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 2 2 3 3 6 12 12 24
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
5 4 5
3 3 3 1
6.4 6.4 6.0 6.4
4.0 4.8 3.6 4.4 4.0 6.0
2.8 8.8 2.7 8.9 2.8 8.8
4.0 4.6 3.0 8.0 4.0 7.0
4.0 4.0

Notes: Large middle layer, interested to see what output looks like.
       Modified Matlab script again: tried out transparency, and converting
       "035Rhoplot" into a string to use multiple times: didn't work.
       Will enter value, e.g."035", twice into script then erase from file name
       on c: drive, so all files are imported into Matlab as "Rhoplot". 
______________________________________

Run: 037 (Wider/ shallower powder bed mesh for 10 scan single layer)
Program: stmet3dgmres_am
Date: 12.12.01

120 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0 6.0 16.0
4.0 4.0

Notes: Made powder bed mesh much larger than anticipated necessary, just because it can
       be done! Enough memory etc., room for expansion. Looked at 3D part with Matlab: depth
       continues to evolve significantly for 5mm into x scans, more at end due to static
       thermal mesh during cooling. Decided to increase available x distance
       (ie powder bed x nodes) even more, see what happens.
______________________________________

Run: 038 (Powder bed mesh expanded in x direction from 037)
Program: stmet3dgmres_am
Date: 13.12.01

180 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0 3.0 29.0
4.0 4.0

Notes: More x nodes, extreme scan start/ end points. 143 steps/ scan.
       Froze during running! On the very last heat step of one of the scans.
______________________________________

Run: 039 (Reducing sintered geometry)
Program: stmet3dgmres_am
Date: 13.12.01

180 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
4.0 4.0

Notes: Probably freezing due to lack of free memory. Trying to see what is maximum
       scan length where freezing does not occur. This geometry ran OK.
______________________________________

Run: 040 (Increasing sintered geometry up to max.)
Program: stmet3dgmres_am
Date: 13.12.01

180 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0
4.0 4.0

Notes: Ran OK. Push the boundaries! But output is very anomalous, probably due to
       long scans. See notes for 047.

       Made some modifications to GSharp script for visualising 040 output, which will be
       useful later: viewing only 1 section at 0 y-axis rotation. Grid superimposed to help
       work out exact depth of scans. Grid values set through XMesh/ YMesh text files.
       Done 18.12.01.

       Also worked out that Rhoplotx y/z position values are interpolated from the irregular
       grid provided ("y" shrinkage) to a regular one before display. Probably Matlab could
       achieve this same transformation (GSharp command "bilinear").
______________________________________

Run: 041 (Increasing sintered geometry up to max.)
Program: stmet3dgmres_am
Date: 13.12.01

180 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0 6.0 25.0
4.0 4.0

Notes: Froze at the end of a scan (4-ish), similar to 038. 105 heat steps, >100 a problem?
______________________________________

Run: 042 (99 heat steps/ scan)
Program: stmet3dgmres_am
Date: 13.12.01

180 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0 7.0 25.0
4.0 4.0

Notes: Seems to have frozen again, 18:15 13.12.01. Came back in the morning, still frozen.
______________________________________

Run: 043 (Testing freeze limits)
Program: stmet3dgmres_am
Date: 14.12.01

180 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 
4.0 4.0

Notes: Froze, end of scan 6. 10-25mm must be max. poss scan length for this size of powder
       bed (040). 180 nodes -> 33mm of powder bed in x direction, but only 15mm scannable.
______________________________________

Run: 044 (Try reducing z size of powder bed.)
Program: stmet3dgmres_am
Date: 1.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 10.0 26.0 
4.0 4.0

Notes: Will this size of line run now? Is freezing due to memory or a heat solution problem?
       Noted before that end of scan is large due to static mesh remaining whilst mat'l cools.
       Does heat get pushed along by mesh due to back surface boundary condition: this effect
       would get larger as line becomes longer. Would be worse at higher (speed & power).

       Still froze, despite reducing powder bed size. Same point: end of scan 6.
______________________________________

Run: 045 (Increase number of parallel scans instead)
Program: stmet3dgmres_am
Date: 15.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
15 1
16.0 15.0
10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0 10.0 25.0
4.0 4.0

Notes: Will it run OK? Dwell step takes longer and longer for each scan. 4.2s for scan 8.
       Crashed after 136 heat steps (out of bounds). How did it get as far as 136?
       All scans 10-25mm, 83 steps only. Something in dat file?
       Re-ran: scan no. 11 has NLIMIT 1105! Is 10 scans max. number?
______________________________________

Run: 046 (Try 15 short scans)
Program: stmet3dgmres_am
Date: 16.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
15 1
16.0 15.0
10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0
4.0 4.0

Notes: Will it run OK? No, went utterly mad on scan 11 again, 1140 heat steps planned.
       Interesting to note how dwell time is 0.0s for such short lines.
       Actually says in program notes that 10 is max. number of scans per layer (as well as
       being maximum number of layers in model).
______________________________________

Run: 047 (Try 5 short scans, see if diminishing/ increasing thickness)
Program: stmet3dgmres_am
Date: 16.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
5 1
16.0 15.0
10.0 14.0 10.0 14.0 10.0 14.0 10.0 14.0 10.0 14.0
4.0 4.0

Notes: Output of 040 is a bit disturbing: took an x-plane section through approx. centre
       of layer, no visible sign of scan thickness reducing as z decreases (from n -> 
       n+1th scan). First scan in layer is the smallest, very counter-intuitive! So
       doing geom. based on 016b, 5 scans. Effect in 040 due to scan spacing/ scan length?

       Results of this run more encouraging, large first scan then reduction in depth.
______________________________________

Run: 048 (5 short scans at lower scan spacing)
Program: stmet3dgmres_am
Date: 17.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
5 1
16.0 15.0
10.0 14.0 10.0 14.0 10.0 14.0 10.0 14.0 10.0 14.0
4.0 4.0

Notes: Compare to previous. Quite happy with result, clearly shows first scan as largest,
       reduction after this. Problem must be down to scan length, as opposed to spacing.
______________________________________

Run: 049 (10 slightly longer scans at low scan spacing)
Program: stmet3dgmres_am
Date: 17.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
16.0 15.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Comparing to previous, perceptible depth increase due to 1mm longer scans.
______________________________________

Run: 050 (Higher scan spacing)
Program: stmet3dgmres_am
Date: 18.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
16.0 15.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Comparing to previous, small change in maximum depth. More severe serration,
       peak-trough for each scan.
       Made some Isosurface plots using temperature data in 050Rhoplot. See 066 below.

       Made some more modifications to GSharp script for visualising 050 output (on top of
       those made for visualising 040). Custom contour intervals, so can have 1 contour at
       4358kg/m^3, and 4 around 7500kg/m^3. Useful for measuring scan depth.
       Done 16.01.02 (a while after Rhoplot generated).
______________________________________

Run: 051 (10x 5mm scans at low scan spacing as 049, 10% power decrease)
Program: stmet3dgmres_am
Date: 19.12.01

180 10 120
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
112.5 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
16.0 15.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Compare to 049. Specifically, is depth definition great enough to capture change?
       approx. 0.47mm depth (steady state section), compare to 0.55mm for 049. Not easy
       to estimate from Matlab plots though, GSharp with a grid would be better.
______________________________________

Run: 052 (10x 5mm scans at low scan spacing as 049, 8x depth definition)
Program: stmet3dgmres_am
Date: 19.12.01

150 80 100
17 129 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.06 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
16.0 15.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Reduced no. of x and z powder bed nodes, extended y because layer depth 8x smaller. 
       Compare to 050. Specifically, is depth definition great enough to capture change?

       Increasing thermal mesh 8x in size: could be asking too much performance-wise.
       Running out of virtual memory at first: allocated a load more paging memory.
       From 800Mb on d:, moved to 2000Mb on d: and 2000Mb on e:. No further virtual memory
       warnings, but still crashed. Loads of subroutines specified. Will go to 4x depth res.
______________________________________

Run: 053 (10x 5mm scans at low scan spacing as 049, 4x depth definition)
Program: stmet3dgmres_am
Date: 20.12.01

150 30 100
17 65 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 6 6 6 6 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.125 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
16.0 15.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Reduced thermal mesh size, will hopefully run now.
       Actually, crashed in similar style. Go to 2x then.
______________________________________

Run: 054 (10x 5mm scans at low scan spacing as 049, 2x depth definition)
Program: stmet3dgmres_am
Date: 20.12.01

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Running at thermal mesh 2x depth dimension. Ran successfully, one detail to take on
       board: because layer thickness was halved, part begins 0.25mm higher in bed than
       previously. Should have put 2 empty layers in above part.

       Settings as 049 (except z start, y definition). Compare.
       Very similar features, but more defined. Must be a positive step.
______________________________________

Run: 055 (10x 5mm scans at low scan spacing, 10% power decrease as 051: 2x depth definition)
Program: stmet3dgmres_am
Date: 20.12.01

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
112.5 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
0.4 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0

Notes: Compare to 051. Specifically, is depth definition great enough to capture change?
       Difficult to estimate on Matlab plots. More defined than 051.
______________________________________

Run: 056 (As 055, but with variable absorptivity per scan and marching mesh at end of scan.)
Program: stmet3dgmres_am2
Date: 04.01.02

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
112.5 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
(ABSORB value removed) 1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0
0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.4
0.38

Notes: Check end geometry of new scans, bulbous end of scan is gone. Watched values of
       absorb during running (printed on screen), they are read and utilised as expected.
       Rhoplot output file contains all of solid geometry (so don't need to keep updating
       KXMAX during cool down, this is what I expected).       
______________________________________

Run: 057 (As 056, but 5 scans at 0.4 absorb, 5 scans at 0.6)
Program: stmet3dgmres_am2
Date: 04.01.02

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
112.5 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
4.0 4.0
0.40 0.40 0.40 0.40 0.40 0.60 0.60 0.60 0.60 0.60
0.40

Notes: Clearly a big effect on solid mass.
______________________________________

Run: 058 (Doubled scan length to 10mm, different absorptances)
Program: stmet3dgmres_am2
Date: 07.01.02

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
112.5 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: Where does steady state scan depth begin for each line? Effect of absorptance?

       A few very high absorptance scans have lead to geometry which by 5mm scan length
       has hit bottom of thermal mesh. Huge shrinkage and melting, at low x end just a
       melted block!
______________________________________

Run: 059 (As 058, but 3x speed, 1/3 power)
Program: stmet3dgmres_am2
Date: 08.01.02

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
37.5 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: More or less melted material? Actually, answer is obvious: 1/9th energy in!
______________________________________

Run: 060 (As 059, but 2x speed, 2x power)
Program: stmet3dgmres_am2
Date: 09.01.02

150 30 100
17 33 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
75.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: More or less melted material than 059?
______________________________________

Run: 061 (Trying to expand thermal mesh again)
Program: stmet3dgmres_am2
Date: 09.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
75.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: Errors reading info, basically means out of memory. Tried increasing stack to
       0x60000000 in SLINK, which worked but to no avail. I was assuming out of memory,
       but has to do with MALU value in GMRES, see 064.
______________________________________

Run: 062 (Reduce y expansion from 8 to 4 nodes)
Program: stmet3dgmres_am2
Date: 09.01.02

150 30 100
20 37 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
75.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: Errors reading info, out of memory as before.
______________________________________

Run: 063_I (No y expansion, just x/z expansion now.)
Program: stmet3dgmres_am2
Date: 09.01.02

150 30 100
20 33 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
75.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: Errors reading info, out of memory as before. Suppose that x/z increases have larger
       impact, because more y nodes.
______________________________________

Run: 063_II (Now only x thermal mesh expansion compared to last successful run, 060)
Program: stmet3dgmres_am2
Date: 09.01.02

Bold changes are as compared to 060.

150 30 100
20 33 17
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 12 12
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
75.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: In each case, IERR number has been -3. Checked in program to see what this error
       corresponds to, it means that ALU array is too small. So must increase size of MALU.
       Will rerun this same param set with MALU and IWK as 250000 (compared to 200000).
______________________________________

Run: 064 (Now only x thermal mesh expansion compared to last successful run, 060)
Program: stmet3dgmres_am2
Date: 09.01.02

Notes: As 063, but with MALU/ IWK increased, 200000 to 250000. Runs, but stopped it.
______________________________________

Run: 065 (Trying to expand thermal mesh again, as 061 but with new MALU value 250000.)
Program: stmet3dgmres_am2
Date: 09.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
75.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
11.0 11.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.35 0.35 0.80 0.80 0.10 0.10 0.90 0.90 0.60 0.60
0.40

Notes: Failed again, but with IERR -3. So, increased MALU/ IWK twice again.
       With MALU now doubled (400000), runs.
       Begs the question: was this why 64 element y thermal mesh failed before?
       Don't remember seeing a "-3" printed out back then.
______________________________________

Run: 066 (As 050, but with marching cooldown and mesh refinements. Temperature comparison.)
Program: stmet3dgmres_am2
Date: 12.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
125.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
10.0 10.0
0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
0.4

Notes: Made some Isosurface plots for 050 DTAV values (rather than RHOAV) out of curiosity.
       Quite informative, particularly can address question: does material drop below
       solidus temperature before melted zone falls outside thermal mesh? For 050, volume
       >850'C is tiny. Of course, at end of each scan there was a deliberate dwell so that
       T could fall below TDWELL (1280'C). Creates a heat flow shaft truncated by bottom of
       thermal mesh (heat sinking down to bottom).

       066 equivalent thermal Isosurfaces:
______________________________________

Run: 067 (As 066, but took speed and power down, and absorptance selectively.)
Program: stmet3dgmres_am2
Date: 17.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
20.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
10.0 10.0
0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.4 0.4
0.4

Notes: I think that speed may be low in experiments (Carl's balling profiles), hence movement
       to lower speed. No densification in this run! Again, P/U not be all and end all!
______________________________________

Run: 068 (As 020 with extra layer, demo for presentation 23.01.02.)
Program: stmet3dgmres_am2
Date: 17.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
20.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
3 1
14.0 13.0
10.0 13.0 12.0 15.0 14.0 17.0
10.0 10.0
0.5 0.5 0.5
0.4

Notes: Zero densification, all Rhoplot values 4356!
______________________________________

Run: 069 (As 068 with 1.5x power.)
Program: stmet3dgmres_am2
Date: 17.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
30.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
3 1
14.0 13.0
10.0 13.0 12.0 15.0 14.0 17.0
10.0 10.0
0.5 0.5 0.5
0.4

Notes: Still no densification whatsoever!
______________________________________

Run: 070 (As 069 with 4/3x power.)
Program: stmet3dgmres_am2
Date: 17.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
3 1
14.0 13.0
10.0 13.0 12.0 15.0 14.0 17.0
10.0 10.0
0.5 0.5 0.5
0.4

Notes: Now have significant sintered geometry. The breakthrough level:
       P.Abs./U.ScSpac = 40(0.5)/0.5(5/6) = 48.
       Even this much power only produces a scan about 0.9mm across.
______________________________________

Run: 071 (As 070 with 5/4x power.)
Program: stmet3dgmres_am2
Date: 18.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
50.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
3 1
14.0 13.0
10.0 14.0 12.0 16.0 14.0 18.0
10.0 10.0
0.5 0.5 0.5
0.4

Notes: Much better formed lines. Andrews x absorp. = 60.
______________________________________

Run: 072 (As 067, but doubled power- there was zero densification.)
Program: stmet3dgmres_am2
Date: 23.01.02

Param.s as compared to 067: 068 to 071 were just for presentation.

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0
10.0 10.0
0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.4 0.4
0.4

Notes: Any densification in this run? For next run, want scan length back up to 10mm.
______________________________________

Run: 073 (As 072, but increased scan length 5 to 10mm.)
Program: stmet3dgmres_am2
Date: 23.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.4 0.4
0.4

Notes: Steep increase in track depth with scan direction. Worsening in scan direction!
______________________________________

Run: 074 (As 073, but 3/6 rather than 5/6 scan spacing.)
Program: stmet3dgmres_am2
Date: 23.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.4 0.4
0.1

Notes: Steep increase in track depth with scan direction. Worsening in scan direction!
______________________________________

Run: 075 (As 074, but higher power/ speed.)
Program: stmet3dgmres_am2
Date: 23.01.02

150 30 100
20 41 19
4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0 10.0 20.0
10.0 10.0
0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.4 0.4
0.1

Notes: 
______________________________________

Run: 076 (Similar to 074, but more "x" thermal nodes.)
Program: stmet3dgmres_am2
Date: 24.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: Hoping to curb scan depth build-up in scan direction.
______________________________________

Run: 077 (As 076, but 5/6 scan spacing.)
Program: stmet3dgmres_am2
Date: 24.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: Hoping for full melting etc.
______________________________________

Run: 078 (As 077, but more power.)
Program: stmet3dgmres_am2
Date: 24.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: Froze up on 39th heat step, don't know what layer/ whether heating or cooling.
       Kept getting number "1", several times per heat step. Accorded to code,
       this means that convergence was not acheived in itmax iterations.
       Could be pure bad luck based on values chosen: try something similar but different.
______________________________________

Run: 079 (As 078, but 2W change in power.)
Program: stmet3dgmres_am2
Date: 25.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
62.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: Froze again, 2 heat steps earlier.
______________________________________

Run: 080 (As 078, but 2W less rather than more power.)
Program: stmet3dgmres_am2
Date: 25.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
58.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: 
______________________________________

Run: 081 (As 080, but 3/6 scan spacing.)
Program: stmet3dgmres_am2
Date: 28.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
58.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: 
______________________________________

Run: 082 (As 081, but different power/ speed.)
Program: stmet3dgmres_am2
Date: 29.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
190.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4
0.1

Notes: At this time, created 2 graphs on Excel, like experimental process maps but for
       stmet3dgmres_am2. 1 for 3/6, 1 for 5/6 scan spacing. (P.Absorp) versus U. 
______________________________________

Run: 083 (As 082, but different power/ speed.)
Program: stmet3dgmres_am2
Date: 30.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
85.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2
0.1

Notes: As conditions for the manufacture of first 3 single layers, to be compared.
______________________________________

Run: 084 (As 083, but different power/ speed. Proving out parts to be made experimentally.)
Program: stmet3dgmres_am2
Date: 30.01.02

150 30 100
22 41 19
4 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0 11.0 21.0
11.0 11.0
0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2
0.1

Notes: 
______________________________________

Run: 085 (New P/U. Added 4 more "y" thermal mesh elements, each 12 PB elements long.)
Program: stmet3dgmres_am2
Date: 31.01.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
11.0 11.0 (12.0 12.0 for third run, see below)
0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2
0.1

Notes: Also increased number of thermal mesh "x" PB elements in front of laser beam,
       11 to 13. This is now the same as number of thermal mesh "z" PB elements to
       left/ right of beam. No excuse for infinite "y" growth due to mesh now (i.e. heat
       flowing to front of mesh (20'C) at low scan speeds).

       Proving out power and speed planned to be used to make an experimental layer.

       Crashed the first time through, at HEAT STEP 39 (don't know which scan, whether heating
       or cooling. Changed stmet3dgmres_am2 code, to say "HEAT STEP n" or "COOL STEP n", more
       informative. Also allocated 55000000 stack (c.f. 50000000). Reran 085.

       Crashed again, second last cool step for the entire run! Because I had left "x" start
       as 11 for top layer (only 1 heat step). But, should have changed it following addition
       of 2 nodes in front of laser beam in thermal mesh. Ran for a third time.

       Once it finally ran- no densification whatsoever. All Rho values are 4356.
______________________________________

Run: 086 (as 084, but higher absorptance. Also some program changes, see below.)
Program: stmet3dgmres_am2
Date: 31.01.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: To help work out where the program has frozen in future, changed the text printed
       at each heat/ cool step. Now prints the layer and scan number, as well as the
       heat step.

       Format: A - B - C     A =layer no., B =scan no., C =Heat/Cool step.

       Have also added lines at start and end of program to record processor time,
       output total elapsed run time at end of program (mins).

       Elapsed time for 086: 296 mins
______________________________________

Run: 087 (as 085, but higher absorptances.)
Program: stmet3dgmres_am2
Date: 01.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 087: 267 mins
______________________________________

Run: 088 (As 087, different P/U.)
Program: stmet3dgmres_am2
Date: 01.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 18.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 088: 258 mins
______________________________________

Run: 089 (As 087, upped the power.)
Program: stmet3dgmres_am2
Date: 01.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 089: 287 mins
______________________________________

Run: 090 (Different P/U.)
Program: stmet3dgmres_am2
Date: 04.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 18.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 090: 168 mins
______________________________________

Run: 091 (Different P/U.)
Program: stmet3dgmres_am2
Date: 04.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
240.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 091: 350 mins
______________________________________

Run: 092 (Different P/U.)
Program: stmet3dgmres_am2
Date: 04.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
72.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 092: 367 mins
______________________________________

Run: 093 (Different P/U.)
Program: stmet3dgmres_am2
Date: 05.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
240.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 

       Elapsed time for 093: 348 mins
______________________________________

Run: 094 (Different P/U.)
Program: stmet3dgmres_am2
Date: 05.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
280.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: Added a few more new lines of code: now, if program comes across a scan which is
       specified in stme3dat to have same start and end "x" values, it assumes this scan
       is to be skipped. Saves 1 heat and MGXMAX cool steps on layer 2 each run (10ish mins).

       Only likely consequence: any holes in top of Rhoplot094 geometry?
       Checked 094Phoplotx on GSharp, it was fine.

       Program ran fine with skipped top layer.

       Elapsed time for 094: 302 mins
______________________________________

Run: 095 (Different P/U, absorptances tweaked.)
Program: stmet3dgmres_am2
Date: 06.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
44.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8636 0.8636 0.8636 0.8636 0.8636 1.0 1.0 1.0 1.0 1.0
0.1

Notes: 

       Program 

       Elapsed time for 095: 381 mins
______________________________________

Run: 096 (Different P/U, absorptances tweaked.)
Program: stmet3dgmres_am2
Date: 06.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
38.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.6842 0.6842 0.6842 0.6842 0.6842 1.0 1.0 1.0 1.0 1.0
0.1

Notes: Checking if 3/6 ScSpac success translates to 5/6 ScSpac success.

       Elapsed time for 096: 352 mins
______________________________________

Run: 097 (Different P/U, absorptances tweaked.)
Program: stmet3dgmres_am2
Date: 06.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0
0.1

Notes: Checking if 3/6 ScSpac success translates to 5/6 ScSpac success.

       Elapsed time for 097: 316 mins
______________________________________

Run: 098 (Different P/U, absorptances tweaked.)
Program: stmet3dgmres_am2
Date: 07.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.55 0.55 0.55 0.55 0.55 1.0 1.0 1.0 1.0 1.0
0.1

Notes: Checking if 3/6 ScSpac success translates to 5/6 ScSpac success.

       Program 

       Elapsed time for 098: 248 mins
______________________________________

Run: 099 (Tentatively trying 9/6 scan spacing.)
Program: stmet3dgmres_am2
Date: 08.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
7 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 -
12.0 12.0
0.55 0.55 0.55 1.0 1.0 1.0 1.0 -
0.1

Notes: Checking if 3/6 ScSpac success translates to 9/6 ScSpac success.

       Had to reduce number of scans. if getting serious about 9/6 spacing, could increase
       number of "z" nodes in powder bed.

       Program ran, then wrote Rhoplot, Rhoplotz. Came up with a run-time error whilst
       writing Rhoplotx, and did not finish. Checked Rhoplotx: after 39 "x" slices,
       Rhoplotx started printing bits and bobs of data, incomplete for remaining slices.
       No more "Slice x =" text printed. Was data missing? Error message says
       "missing handle".
       Cause: out of hard drive space on e:. Must delete/ move some density data.

       Initiated an idea to reduce size of output files, also want to reduce processing time.

       Reran 099 first though, after freeing up space on e:

       Elapsed time for 099: 238 mins
______________________________________

Run: 100 (dat as 099, running new version of stmet3dgmres.)
Program: stmet3dgmres_am3
Date: 11.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
7 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.55 0.55 0.55 1.0 1.0 1.0 1.0
0.1

Notes: New version has two changes:

       To reduce processing time, temperatures throughout the thermal mesh are checked each
       cool step. If TMAX< TDWELL, further cooling steps are skipped and next scan begins.
       Program reports max. no. of cool steps found for any scan in build, except case below.
       If no. of cool steps reaches MGXMAX, next scan is started and program reports this
       occurrence at the end.

       To look out for: time saving, specifically does temp. checking slow cool steps much?
       Can tell because: equivalent to time between starting cooldown phase/ cool step 1.
       Test is almost instantaneous.

       Change 2: in OUTPUT, formatting of Rhoplot, Rhoplotx/z files to remove unnecessary
       spaces. These are counted as characters but have no function. Have reduced size of
       fields in which x,y,z,RHO,DTAV data are output, from default values.

       Elapsed time for 100: 152 mins (5/8 previous time).
       Maximum number of cool steps before scan finished: 4 at scan 3\1.

       New size of Rhoplot (compared to 86,487kB)    : 50,359kB (5/8 previous size)
       New size of Rhoplotx/z (compared to 51,458kB) : 30,656kB (3/5 previous size)

       Check: format of rhoplot, Rhoplotx/z are OK?
       NO! Format F9.6 produces field width 9 but 6 D.P.s (c.f. 6 S.F.s). So if values
       are 10 or above, not enough space provided for them. Tried F9.*, F9, no good.

       So, analysed how many D.P.s needed for x,y,z,RHO,DTAV, entered each one differently.
       Running same geometry again: Rhoplot files should be even smaller now.
______________________________________

Run: 101 (dat as 099/100, changed FORMAT statements for Rhoplot, Rhoplotx/z.)
Program: stmet3dgmres_am3
Date: 11.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
7 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.55 0.55 0.55 1.0 1.0 1.0 1.0
0.1

Notes: Changes to OUTPUT, stmet3dgmres_am3: x values get format F7.3
                                            y values get format F7.4
                                            z values get format F7.3
                                          RHO values get format F7.1
                                         DTAV values get format F6.0  (Based on their limits).

       Elapsed time for 101: 153 mins (almost exactly as 100).
       Maximum number of cool steps before scan finished: 4 at scan 3\1 (as 100).

       New size of Rhoplot (compared to 86,487kB)    : 38,317kB (2/5 previous size)
       New size of Rhoplotx/z (compared to 51,458kB) : 24,088kB (1/2 previous size)

       Check: format of Rhoplot, Rhoplotx/z are OK?
              Fine, but only 1 issue: can DTAV be read (format "1000.", no no.s after point)?
              Yes, Matlab can read DTAV. Plotted a 104tp1_1.jpg to prove it.
______________________________________

Run: 102 (Back to testing 9/6 ScSpac.)
Program: stmet3dgmres_am3
Date: 11.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
119.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
7 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 1.0 1.0 1.0
0.1

Notes: Was freezing up at heat step 3\4\12, twice over. So, changed 120W to 119W power.

       Elapsed time for 102: 140 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\5.
______________________________________

Run: 103 (Back to testing 9/6 ScSpac.)
Program: stmet3dgmres_am3
Date: 12.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
7 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 1.0 1.0 1.0
0.1

Notes: 

       Elapsed time for 103: 120 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\5.
______________________________________

Run: 104 (More points on 3/6 process map.)
Program: stmet3dgmres_am3
Date: 13.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.1

Notes: 

       Elapsed time for 104: 197 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 105 (Points for 1mm/s, 3/6 Scan Spacing.)
Program: stmet3dgmres_am3
Date: 20.02.02

150 30 100
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
14.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
0.1

Notes: 075, seemed to fail at 100W, 0.2 and 0.4 absorp.

       Elapsed time for 105: 255 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 106 (Increased "z" size of powder bed to get 10 scans in at 9/6 ScSpac.)
Program: stmet3dgmres_am3
Date: 21.02.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.2 0.2 0.2 0.2 0.2 0.5 0.5 0.5 0.5 0.5
0.0

Notes: New "z" start point due to more powder bed nodes.

       Elapsed time for 106: 148 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\6.
______________________________________

Run: 107 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 28.02.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
80.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: 

       Elapsed time for 107: 295 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\7.
______________________________________

Run: 108 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 05.03.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
50.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 1.0 1.0 1.0 1.0 1.0
0.0

Notes: 

       Elapsed time for 108: 141 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 109 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 05.03.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.7 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Crashed at 3 \ 6 \ 29. Ran again with P=99.8W.

       Elapsed time for 109: 315 mins.
       Maximum number of cool steps before scan finished: 14 at scan 3\9.
______________________________________

Run: 110 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 07.03.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
20.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0
0.0

Notes: 

       Elapsed time for 110: 104 mins.
       Maximum number of cool steps before scan finished: 1 at scan 3\1.
______________________________________

Run: 111 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 08.03.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
80.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: 

       Elapsed time for 111: 234 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\6.
______________________________________

Run: 112 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 13.03.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: 

       Elapsed time for 112: 172 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 113 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 20.03.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
90.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.2778 0.2778 0.2778 0.2778 0.2778 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Crashed at 3 \ 6 \ 1 (a heat step I think). Ran again with ABSORB as follows:

       0.2778 0.2778 0.2778 0.2778 0.2778 0.99 0.99 0.99 0.99 0.99

       Elapsed time for 113: 508 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\6.
______________________________________

Run: 114 (More points on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 11.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 18.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5833 0.5833 0.5833 0.5833 0.5833 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 114: 159 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\6.
______________________________________

Run: 115 (More points on 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 12.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
20.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 115: 151 mins.
       Maximum number of cool steps before scan finished: 2 at scan 3\6.
______________________________________

Run: 116 (Revisiting 0.5 mm/s on 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 17.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
50.0 0.5 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 116: 397 mins.
       One or more scans did not fully solidify, even in MGXMAX cool steps!
______________________________________

Run: 117 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 22.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
80.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at cool step 3 \ 10 \ 2. Ran again with ABSORB as follows:

       0.75 0.75 0.75 0.75 0.75 0.99 0.99 0.99 0.99 0.99

       Elapsed time for 117: 245 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\6.
______________________________________

Run: 118 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 25.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 118: 187 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 119 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 29.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 119: 159 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 120 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 29.04.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 120: 215 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\6.
______________________________________

Run: 121 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 01.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.666 0.666 0.666 0.666 0.666 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 121: 272 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\7.
______________________________________

Run: 122 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 06.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 0.9167 0.9167 0.9167 0.9167 0.9167
0.0

Notes: Elapsed time for 122: 270 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 123 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 10.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
90.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.778 0.778 0.778 0.778 0.778 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 123: 221 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 124 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 12.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 124: 200 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 125 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 13.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
20.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 125: 104 mins.
       Maximum number of cool steps before scan finished: 1 at scan 3\1.
______________________________________

Run: 126 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 14.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 126: 128 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 127 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 17-20.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
80.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 9 \ 30. Ran again with ABSORB as follows:

       0.75 0.75 0.75 0.75 0.75 0.99 0.99 0.99 0.99 0.99

       Second time through: froze at heat step 3 \ 10 \ 48. Ran again with ABSORB as follows:

       0.75 0.75 0.75 0.75 0.75 0.995 0.995 0.995 0.995 0.995

       Third time through: froze at some point after 3 \ 6 \ 1 (whole page of number "1"s).
       Ran again with ABSORB as follows:

       0.75 0.75 0.75 0.75 0.75 0.992 0.992 0.992 0.992 0.992

       Elapsed time for 127: 293 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\8.
______________________________________

Run: 128 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 21.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
80.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 10 \ 4. Ran again with ABSORB as follows:

       0.75 0.75 0.75 0.75 0.75 0.995 0.995 0.995 0.995 0.995

       Elapsed time for 128: 240 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\6.
______________________________________

Run: 129 (Single line scan, for communication of output.)
Program: stmet3dgmres_am3
Date: 22.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
1 1
20.0 13.0
12.0 22.0
12.0 12.0
1.0
0.0

Notes: Elapsed time for 129: 25 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 130 (Two line scan, for communication of output.)
Program: stmet3dgmres_am3
Date: 22.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
2 1
20.0 13.0
12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0
0.0

Notes: Elapsed time for 130: 46 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 131 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 23.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
140.0 50.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.71 0.71 0.71 0.71 0.71 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 131: 91 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 132 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 23.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
240.0 100.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 132: 80 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 133 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 25.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 50.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 133: 147 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\6.
______________________________________

Run: 134 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 26.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
140.0 30.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.71 0.71 0.71 0.71 0.71 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 134: 153 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\6.
______________________________________

Run: 135 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 27.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 30.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 135: 193 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\1.
______________________________________

Run: 136 (Low speed, high power points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 27.05.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
130.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.846 0.846 0.846 0.846 0.846 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 2 \ 34 (2 "1"s printed).
       Ran again with ABSORB as follows:

       0.845 0.845 0.845 0.845 0.845 1.0 1.0 1.0 1.0 1.0

       Second time through: froze at heat step 3 \ 2 \ 35.
       Ran again with ABSORB as follows:

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Third time through: froze at heat step 3 \ 2 \ 36 (2 "1"s printed).
       Ran again with ABSORB as follows:

       0.87 0.87 0.87 0.87 0.87 1.0 1.0 1.0 1.0 1.0

       Fourth time through: froze at heat step 3 \ 2 \ 35 (2 "1"s printed).
       Ran again with ABSORB as follows:

       0.9 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0

       Fifth time through: froze at unknown heat step (whole screen of "1"s printed).
       Ran again with higher power, 150, and absorptance:

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Sixth time through: froze at heat step 3 \ 2 \ 34 (whole screen of "1"s printed).
       Ran again with higher power, 200, and absorptance:

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Seventh time through: froze at heat step 3 \ 2 \ 30 (whole screen of "1"s printed).
       Ran again with higher speed (6.0 mm/s), power and absorptance as before:

       200.0 6.0 1.1

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Eighth time through: froze at heat step 3 \ 2 \ 31.
       Ran again with lower speed (5.0 mm/s), power and absorptance as before:

       200.0 5.0 1.1

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Ninth time through: froze at heat step 3 \ 2 \ 25.
       Ran again with speed 6.0 mm/s, power and absorptance changed:

       140.0 6.0 1.1

       0.929 0.929 0.929 0.929 0.929 1.0 1.0 1.0 1.0 1.0

       Tenth time through: froze at heat step 3 \ 2 \ 44 (whole screen of "1"s printed).
       Gave up on this zone. Speed, power and absorptance changed:

       150.0 40.0 1.1

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Elapsed time for 136: 135 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\6.
______________________________________

Run: 137 (Recheck points, low speed and high power, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 04.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
125.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 137: 224 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 138 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 04.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 75.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 138: 84 mins.
       Maximum number of cool steps before scan finished: 2 at scan 3\6.
______________________________________

Run: 139 (High speed points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 05.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
184.0 50.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.902 0.902 0.902 0.902 0.902 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 139: 160 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\6.
______________________________________

Run: 140 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 05.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
53.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.868 0.868 0.868 0.868 0.868 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 140: 277 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 141 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 06.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
126.0 30.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.905 0.905 0.905 0.905 0.905 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 141: 155 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 142 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 06.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 60.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.85 0.85 0.85 0.85 0.85 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 142: 129 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\6.
______________________________________

Run: 143 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 07.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.85 0.85 0.85 0.85 0.85 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 143: 231 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\1.
______________________________________

Run: 144 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 10.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 9.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 144: 224 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\6.
______________________________________

Run: 145 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 11.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
140.0 40.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.929 0.929 0.929 0.929 0.929 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 145: 145 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 146 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 11.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
190.0 60.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.947 0.947 0.947 0.947 0.947 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 146: 141 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\3.
______________________________________

Run: 147 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 11.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 7.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 2 \ 47 (9 "1"s printed).
       Ran again with speed 7.0 mm/s, power changed:

       180.0 7.0 1.1

       0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0

       Ran, wrote Sintprod and Rhoplot, but then there was an exception
       during writing of Rhoplotz.
       147Rhoplotz: no DTAV data written, don't know why.

       So elapsed time for 147: not known.
       Maximum number of cool steps before scan finished: unknown.

       Was due to lack of disk space on e: again.
       Moved files to d:, reran.

Notes: Elapsed time for 147: 229 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\1.
______________________________________

Run: 148 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 12.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
190.0 7.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.895 0.895 0.895 0.895 0.895 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 2 \ 39 (1 "1" printed).
       Ran again with speed 7.0 mm/s, power and absorptance changed:

       185.0 7.0 1.1

       0.919 0.919 0.919 0.919 0.919 1.0 1.0 1.0 1.0 1.0

       Second time through: froze at heat step 3 \ 2 \ 39 (4 "1"s printed).
       Ran again with speed, power and absorptance changed:

       150.0 6.0 1.1

       0.933 0.933 0.933 0.933 0.933 1.0 1.0 1.0 1.0 1.0

       Third time through: froze at heat step 3 \ 2 \ 39.
       Ran again with speed, power and absorptance changed:

       142.0 7.0 1.1

       0.915 0.915 0.915 0.915 0.915 1.0 1.0 1.0 1.0 1.0

Notes: Elapsed time for 148: 229 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\1.
______________________________________

Run: 149 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 13.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
53.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.868 0.868 0.868 0.868 0.868 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 149: 274 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 150 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 16.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
85.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.824 0.824 0.824 0.824 0.824 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 150: 174 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 151 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 18.06.02, continued 28.08.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.7 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 1 \ 36 (4 "1"s printed).
       Ran again with speed 2.0 mm/s, absorptance changed:

       200.0 2.0 1.1

       0.71 0.71 0.71 0.71 0.71 1.0 1.0 1.0 1.0 1.0

       Second time through: froze at heat step 3 \ 1 \ 33 (3 "1"s printed).
       Ran again with speed 2.0 mm/s, absorptance changed:

       200.0 2.0 1.1

       0.69 0.69 0.69 0.69 0.69 1.0 1.0 1.0 1.0 1.0

       Third time through: froze at heat step 3 \ 1 \ 33 (no "1"s printed).
       Ran again with speed 2.0 mm/s, absorptance changed:

       200.0 2.0 1.1

       0.6 0.6 0.6 0.6 0.6 1.0 1.0 1.0 1.0 1.0

       Fourth time through: froze at heat step 3 \ 1 \ 42 (10 "1"s printed).
       Ran again with speed 2.0 mm/s, absorptance changed:

       200.0 2.0 1.1

       0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0

       Fifth time through: froze at unknown heat step (page of "1"s printed).

       Took a break from 151/ 152, A.M. parts are more pressing.

       Ran again with speed 4.0 mm/s, absorptance changed:

       200.0 4.0 1.1

       0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5

       Sixth time through: froze at heat step 3 \ 6 \ 13 (Page of "1"s printed).

       Ran again with speed 4.0 mm/s, absorptance changed:

       200.0 4.0 1.1

       0.43 0.43 0.43 0.43 0.43 0.47 0.47 0.47 0.47 0.47

       Seventh time through: ran.

Notes: Elapsed time for 151: 238 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 152 (Low U, high P points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 1.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 7.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.95 0.95 0.95 0.95 0.95 1.0 1.0 1.0 1.0 1.0
0.0

Took a break from 151/ 152, A.M. parts are more pressing.

Notes: First time through: froze at heat step 3 \ 2 \ 33 (5 "1"s printed).
       Ran again with speed 7.0 mm/s, absorptance changed:

       200.0 7.0 1.1

       0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0

       Second time through: froze at heat step 3 \ 2 \ 42 (3 "1"s printed).
       Ran again with speed 7.0 mm/s, absorptance changed:

       200.0 7.0 1.1

       0.25 0.25 0.25 0.25 0.25 0.15 0.15 0.15 0.15 0.15

       Elapsed time for 152: 152 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 153 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 20.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? Yes

       Elapsed time for 153: 292 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\2.
______________________________________

Run: 154 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 20.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 154: 234 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 155 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 20.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       First time through: froze at heat step 3 \ 2 \ 51 (No "1"s printed).
       Ran again with power changed:

       119.0 6.0 1.1

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 155: 228 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 156 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 21.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 156: 190 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 157 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 21.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 157: 214 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\1.
______________________________________

Run: 158 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 22.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 158: 179 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 159 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 24.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? Yes

       Elapsed time for 159: 294 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\2.
______________________________________

Run: 160 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 24.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 160: 236 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 161 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 25.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 161: 233 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\1.
______________________________________

Run: 162 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 25.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 162: 185 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 163 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 25.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 163: 218 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\1.
______________________________________

Run: 164 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 26.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 164: 181 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 165 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 26.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       First time through: froze at heat step 3 \ 8 \ 54 (No "1"s printed).
       Ran again with power changed:

       59.5 1.0 1.1

       Did "1"s appear, due to non-convergence? Yes

       Elapsed time for 165: 299 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\3.
______________________________________

Run: 166 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 27.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 166: 231 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 167 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 28.06.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 167: 238 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\1.
______________________________________

Run: 168 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 01.07.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
120.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 168: 193 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 169 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 01.07.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 169: 227 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\1.
______________________________________

Run: 170 (A.M. modelling work.)
Program: stmet3dgmres_am3
Date: 02.07.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
155.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0

Notes: Absorptance is uniform for all scans to begin with.
       Delete Rhoplotz, not needed.

       Did "1"s appear, due to non-convergence? No

       Elapsed time for 170: 178 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\1.
______________________________________

Run: 171 (Single line scan, for communication of output.)
         (1-off run, where cool steps are skipped over.)
Program: stmet3dgmres_am3_1off
Date: 19.07.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
1 1
20.0 13.0
12.0 22.0
12.0 12.0
1.0
0.0

Notes: Something going wrong with writing of Sintprod, attempting to read from
       memory position. Stops running whilst writing ALPHA values.

       Same whether GO TO 610 statement invoked, or if OUTPUT moved to before cool steps.

       Converted "am3_1off" to be the same as "am3", changed TDWELL to 999999.
       Still saying the same thing.

       Had forgotten to compile, then SLINK in DOS!

       Ran with GO TO 610 option enabled before cool steps.

       Elapsed time for 171: 22 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\****.
______________________________________

Run: 172 (Single line scan, for communication of output.)
         (1-off run, where cool steps are skipped over.)
Program: stmet3dgmres_am3_1off
Date: 20.07.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
1 1
20.0 13.0
12.0 22.0
12.0 12.0
1.0
0.0

Notes: Modified from 171 situation: writes DTPLOTX, DTPLOTZ for GSharp.

       Elapsed time for 172: 22 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\****.
______________________________________

Run: 173 (Trying to see why temperature field won't converge, based on run 151.)
         (1-off run, where temperatures are written at point of non-convergence.)
Program: stmet3dgmres_am3_1off
Date: 25.07.02 - 26.08.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 6.0 1.1 (Think this is a mistake- should read "200.0 2.0 1.1")
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
1 1
20.0 13.0
12.0 22.0
12.0 12.0
1.0 (Think this is a mistake- should read "0.7")
0.0

Notes: Modified from 172 situation: extra lines to exit from loops when conditions met.
       "IF" statements added in 3 positions, once subroutine heat and twice main program.

       Attempt 1: exit loops where:
       Layer(I or IILAYE)= 3, Scan (ISLICE or IISLICE)= 1, 
       Heat step (J or IISTEP)= 36, No. of iterations (NOCONV)= 4.
       Failed, because NOCONV goes up to above 4 in previous heat steps.
       Does not reset to 0 for new heat steps. Condition never met.

       Attempt 2: exit loops where:
       Layer= 3, Scan= 1, Heat step= 33, No. of iterations= 36.
       Reached NOCONV=173, J=36. Failed: variables given same name in
       main program as in subroutine, but not sure if this matters.

       Attempt 3: exit loops where:
       Layer= 3, Scan= 1, Heat step= 33, No. of iterations= 36.
       Changed variable names to I, ISLICE, J in "IF" statements, main program.
       Might have J and NOCONV values the wrong way round: shouldn't it be heat step 36?
       Cancelled this run.

       Attempt 4: exit loops where:
       Layer= 3, Scan= 1, Heat step= 36, No. of iterations= 36.
       Worked!

       Elapsed time for 173: 6172 mins.
       Maximum number of cool steps before scan finished: -
______________________________________

Back to 151/ 152 now. Done.
______________________________________

Run: 174 (More points, 3/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 31.10.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
100.0 30.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9
0.0

Notes: Elapsed time for 174: 93 mins.
       Maximum number of cool steps before scan finished: 2 at scan 3\6.
______________________________________

Run: 175 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 05.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
160.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8125 0.8125 0.8125 0.8125 0.8125 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 175: 236 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\1.
______________________________________

Run: 176 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 04.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.625 0.625 0.625 0.625 0.625 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 176: 140 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 177 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 05.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
60.0 9.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.6667 0.6667 0.6667 0.6667 0.6667 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 177: 154 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\6.
______________________________________

Run: 178 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 06.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
50.0 12.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 178: 116 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 179 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 07.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 179: 174 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 180 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 08.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
35.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.857 0.857 0.857 0.857 0.857 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 180: 243 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\1.
______________________________________

Run: 181 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 13.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: First time through: froze at heat step 3 \ 3 \ 53 (Page of "1"s printed).
       Ran again with same speed, absorptance changed:

0.65 0.65 0.65 0.65 0.65 0.7 0.7 0.7 0.7 0.7

       Second time through: froze at heat step 3 \ 7 \ 5 (No "1"s printed).
       Ran again with same speed, absorptance changed:

0.65 0.65 0.65 0.65 0.65 0.68 0.68 0.68 0.68 0.68

       Third time through: froze at heat step 3 \ 7 \ 51 (No "1"s printed).
       Ran again with same speed, absorptance changed:

0.65 0.65 0.65 0.65 0.65 0.67 0.67 0.67 0.67 0.67

       Elapsed time for 181: 254 mins.
       Maximum number of cool steps before scan finished: 5 at scan 3\1.
______________________________________

Run: 182 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 20.11.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
40.0 6.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 182: 132 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 183 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 15.12.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
24.0 1.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.75 0.75 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 183: 168 mins.
       Maximum number of cool steps before scan finished: 3 at scan 3\6.
______________________________________

Run: 184 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 16.12.02

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
25.0 4.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 184: 116 mins.
       Maximum number of cool steps before scan finished: 1 at scan 3\1.
______________________________________

Run: 185 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 10.03.03

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 50.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 185: 143 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\6.
______________________________________

Run: 186 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 11.03.03

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 50.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 186: 143 mins.
       Maximum number of cool steps before scan finished: 7 at scan 3\6.
______________________________________

Run: 187 (Parameters as 037, but with new meshes, marching cooldown.)
Program: stmet3dgmres_am3
Date: 11.03.03

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
125.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
4 3 3
10 1 1
15.0 13.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
12.0 12.0
0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
0.0
0.0

Notes: Elapsed time for 187: 252 mins.
       Maximum number of cool steps before scan finished: 3 at scan 4\1.
______________________________________

Run: 188 (Parameters as 037, and now same meshes, marching cooldown.)
Program: stmet3dgmres_am3
Date: 12.03.03

120 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
4 3 3
10 1 1
15.0 15.0 15.0
8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5
8.0 8.0
8.0 8.0
0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
0.0
0.0

Notes: Had to change x start and end, because of marching cooldown.
       Elapsed time for 188: 69 mins.
       Maximum number of cool steps before scan finished: most did not cool in MGXMAX!
       Realised: forgot to set layer thickness to 0.5!
                 also, only 2 layers now. Reran, see 191.
______________________________________

Run: 189 (More points, 9/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 12.03.03

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 25.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 9
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 189: 205 mins.
       Maximum number of cool steps before scan finished: 8 at scan 3\6.
______________________________________

Run: 190 (More points, 5/6 ScSpac process map.)
Program: stmet3dgmres_am3
Date: 13.03.03

150 30 130
22 45 19
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 12 12 12 12 12 12
8 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 8
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
200.0 60.0 1.1
0.25 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 5
10 1
20.0 13.0
12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0 12.0 22.0
12.0 12.0
0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0
0.0

Notes: Elapsed time for 190: 111 mins.
       Maximum number of cool steps before scan finished: 6 at scan 3\6.
______________________________________

Run: 191 (Parameters as 188, but 0.5 thickness and 2 layers only.)
Program: stmet3dgmres_am3
Date: 14.03.03

120 10 160
17 17 17
4 2 1 1 1 1 1 1 1 1 1 1 1 2 4 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 6 6
8 4 1 1 1 1 1 1 1 1 1 1 1 1 4 8
0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0
0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
125.0 2.0 1.1
0.5 20.0 4356.0 7850.0 7850.0
1260.0
7.83 0.0183 437.0 0.275 0.0
308000.0 1380.0 1280.0
1.33 1.0
6.05 0.78
0.875
3 2 3
10 1
15.0 15.0
8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5 8.5 18.5
8.5 8.5
0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
0.0

Notes: Elapsed time for 191: 41 mins.
       Maximum number of cool steps before scan finished: 4 at scan 3\2.
______________________________________

*: Lost results for 010?
This problem prompted recording of run date in this log.

If problem pairing input with output data: date of runs is now recorded here,
file groups (sintprod/ rhoplot) will be dated by NT.

Between Rhoplot019 and Rhoplot022 a new column appears (DTAV).
Corresponds to change, stmet3d to stmet3dgmres. THCC changes.